Place of Origin: Jiangsu, China
Model: CPF-600D2
Capacity: 600 grams per hour
Certification: CE Marked
EINECS No. 233-162-8
CAS NO. 10049-04-4
Control Mode: Manual / Linkage / Residual CLO2 auto-control
Installation Method: Wall-mounted or vertical
Power Supply: 380V/50Hz
Working principle: 5 NaCLO2 + 4HCL = 4CLO2 + 5NaCL + 2H2O
Description:
Two raw chemicals of NaClO2
and HCl
are to be inhaled into the reactor proportionally by two metering pumps, in which produce quantitative high-purity ClO2
solution, and then to be dosed directly in the water tank or pressured water pipe together with the dilution water.The outlet pressure of ClO2 <=
0.40Mpa.Raw chemicals conversion rate >
90%
The dosage of ClO2
can be adjusted manually or automatically by receiving 4-20mA signal sent by flowrate or residual CLO2 sensor.

Product Parameters
1. Operating voltage: AC220V plus or minus 10%
1. Operating voltage: AC220V plus or minus 10%
2. Working temperature: -5--50 Celsius degrees
3. Relative humidity: 80%
4. Max. pressure of water-pipe-line: <0.7MPa
5. There should be no strong electromagnetic field interference around the equipment
6, Function: Manual / Linkage / Flow auto-control
Low level alarm function
Timing start / stop function
Alarm remote transferMarket Applications:
Market Applications: