-High Precision 6 DoF MiniIMU with Full Calibration
-Fully Similar as ADIS16460, Better Performance
-3 Angular Rates and 3 Linear Acceleration Outputs
-Data OutputRate: 200Hz
-Range: Gyro ±400°/s, Accelerometer±6g
-Bias Instability: Gyro 4°/h, Accelerometer±10μg
-Compact and Light weight23.4x 22.4x 8(mm), <15g
-Wide Working Temperature: -40°C~+85°C

IMU80High PerformanceInertial Measurement Unit is a rugged industrial inertial navigation systemprovidingpreciseyaw, pitch, roll as well as 6-axis outputs of angular rate and acceleration at 200Hz.IMU80 adopts MEMS-based inertial sensors and extended Kalmanfilter algorithm, which provides super cost-effective solution for customers
IMU80 Inertial Measurement Unitenjoys small size and light weight, and it is housed in an ultra-durable and compact aluminum housing, it enjoys high reliability in harsh environment, ithas been widely applied in dynamic control systems and attitude systems including Unmanned Aircraft and ROVs, Smart Agriculture, Machine Control, Platform Stabilization, AGV,robotics,etc.

Parameter Value
Min Typical Max
Gyroscopes
Range: -400°/s +400°/s
Bias Instability 3°/h 4°/h 5°/h
Initial Bias Error 0.08°/s 0.1°/s 0.2°/s
Resolution 0.01°/s
Scale Factor Accuracy 0.10%
Non-linearity 0.1%FS
Random Walk 0.2º/√hr 0.3º/√hr 0.5º/√hr
Bandwidth 50Hz
Accelerometers
Range: X, Y, Z -6g +6g
Bias Instability 5μg 10μg 15μg
Initial Bias Error 3mg 4mg 5mg
Resolution 0.5mg
Scale Factor Accuracy 0.10%
Non-linearity 0.1%FS
Random Walk 0.03m/s/√hr 0.05m/s/√hr 0.07m/s/√hr
Bandwidth 50Hz
Environment Conditions
Working Temperature -40~+85°C
Storage Temperature -55~+100°C
Housing Material aluminum
Electrical Features
Input Power Supply 3.3VDC
Power Consumption <0.15W
Interface SPI / UART (optional)
Output Frequency 200Hz
Physical Parameter
Size 23.4 x 22.4 x 8mm
Weight <15grams
Connector 7*2 pins
Remarks g=9.80665 m/s2

- Unmanned Aircraft and ROVs

- Smart Agriculture


- Machine Control


- Platform Stabilization


- AGV


- robotics