Item Name:
ASME U Stamp Industrial Distillation Reboiler
Application: Paper and PulpingTube Material: Titanium Gr.7Tubesheet Material: Titanium Gr.7/SA266Dimension: Dia. 900* Length 6000mm*Surface 180 sqmWeight: 7 tons
Reboilers
are
heat
exchangers
typically
used
to
provide
heat
to
the
bottom
of
industrial
distillation
columns.They
boil
the
liquid
from
the
bottom
of
a
distillation
column
to
generate
vapors
which
are
returned
to
the
column
to
drive
the
distillation
separation.
Proper
reboiler
operation
is
vital
to
effective
distillation.In
a
typical
classical
distillation
column,
all
the
vapor
driving
the
separation
comes
from
the
reboiler.The
reboiler
receives
a
liquid
stream
from
the
column
bottom
and
may
partially
or
completely
vaporize
that
stream.
Steam
usually
provides
the
heat
required
for
the
vaporization.
The
most
critical
element
of
reboiler
design
is
the
selection
of
the
proper
type
of
reboiler
for
a
specific
service.
Most
reboilers
are
of
the
shell
and
tube
heat
exchanger
type
and
normally
steam
is
used
as
the
heat
source.
In
such
reboilers.However,
other
heat
transfer
fluids
like
hot
oil
or
Dowtherm
(TM)
may
be
used.Fuel-fired
furnaces
may
also
be
used
as
reboilers
in
some
cases.
Material Test (PMI)
Ultrasonic Test

Tube-to-tubesheet welding

Penetration Test

Paint thickness measurement

We provides high grade pressure vessel, reactors, heat exchangers, heaters, towers, tanks, columns, condensers, reboilers, separators, evaporators made of Nickel Alloy, Titanium Alloy, Copper-Nickel Alloy, Zirconium, Tantalum Alloy, Super Stainless Steel and clad metals, designed and fabricated according to ASME U, PED, TEMA, API650, EN13445 and other codes. These products have been widely used in such fields as petro-chemical, chemical, salt manufacturing, pharmacy, metallurgy, power, electronics, sea-engineering and environment protection, by Global Top 50 Chemicals for one decade. Our mill is entitled with Grade A1 for design, Grade A1 for fabrication of pressure vessels and ASME U stamps authorization. It is an ISO9001 company certified by National Quality Assurance Limited and awarded with three As of Credit Rating and High- tech enterprise. We have around 40 welders qualified for 252 types of welding, including SAW, STAW, GTAW, GMAW) and 9 persons for non-destructive inspection (including PT,UT,MT,PT), and 5 NDE persons are qualified with the requirements of ASME. R & D Dep. is capable of designing drawings with CAD according to GB and ASME standards. It has such technique specifications and standards related to designing, including ASME, TEMA, API650 and etc. Our manufacturing area for pressure vessel is 14000m2(1st phase) and 15000 m2(2nd phase), among which, there are more than 1000M2 isolated workshop on non-ferrous metal welding. Rolling capacity is 80mm maximum and crane capability is 100 tons maximum.