Medical Oxygen humidification bottle Humidifier empty bottle for Oxygen Concentrator

Usage: The bubble humidifier is indicated for use with oxygen concentrators or gas sources in homecare, hospital, extended care facilities and hospice environments. Don't use on more than one person.
Features:
* 360 degrees molded, low resistance, high output diffuser head design
* Audible 6psi pop off alarm
* Jar permanently etched with large print minimum and maximum water levels
This disposable humidifier has a 6psi pop off audible safety alarm, large easy to grip quad style wind nut, easy flow dome lid design combined with a unique 360 degrees diffuser that helps to reduce rain-out. Easy jar to lid assembly with half turn positive seal with no gasket required, permanent maximum and minimum water level indicators will not wash, wear or rub off.
Specification
How to clean the humidifier bottle?
The humidifier bottle itself is easy to contain dirt, so it should be cleaned regularly. Remove the humidifier bottle from the
oxygen concentrator, wash it with clean water; mix white vinegar with hot water together, put the bottle in the water for 30
minutes for disin'fection. Then wash the humidifier bottle again with warm water, and dry it for later use.
What kind of water is added to the humidifier bottle?
Distilled water or purified water should be added to the humidifier bottle of the oxygen concentrator. Remember not to add tap water directly. Because the tap water contains a lot of impurities, and long-term use will cause problems such as blockage of the nasal oxygen tube, failure of the oxygen concentrator to exhaust gas, and respiratory damage to users. In addition, the water in the humidifier bottle should be replaced every day. Make sure that the lid of the bottle is tightened before inhaling oxygen.
How much water should be added to the humidifier bottle?
Regarding the amount of water, the water only needs to be between the maximum scale and the minimum scale. If there is too little water, the oxygen may not be fully humidified; if there is too much water, the water may flow back into the internal of the machine and damage the machine! So how much water to add, operate according to the water level according to the scale requirements!

Q 1: Do you have any MOQ?
A:Yes,MOQ is 2000pcs.
Q 2: What is the lead time?
A:Sample time 1-5days,mass production 35days for order more than 200000pcs
Q 3: Can we put our logo on packages and products?If yes ,what you need from us?
A :Yes,we can achieve it by higher quaity printing on package with full color etc. Need your logo Ai Format or EPS.
Q 4: Could you offer the dummy sample even pre-production sample before I place the order?
A :Yes,both could be offered for confirmation.
Q 5: If I do not like the color, could I change the color ?
A: Generally this tube have 03 colors for choice.
Q 6: How should I pay for you if I place order to you?
A :Usually, the Payment terms Paypal ,T/T ,West Union could be accepted.30%deposit in advance,70% paid before the shipment.