GORVIA A301 Acetic Silicone Sealant
GORVIA® A301 has excellent bonding properties. Capable of tightly bonding various material surfaces, such as glass, metal, plastic, etc., providing reliable sealing effect. Able to maintain performance under extreme temperature and humidity conditions, corrosion resistance, resistance to chemical corrosion and UV exposure. Fast curing, easy to apply, aging resistance, flexibility, resistance to rain and moisture. Can be used for a long time in the range of -60ºC~+300ºC, with good oxidation resistance and yellowing resistance. And has excellent sealing performance and tensile strength, seams are not easy to break or stretch deformation.
Application
1. the use of a wide range of dry clean metal, glass, most of the non-grease wood, silicone resin, plus sulfur silicone rubber, ceramics, natural and synthetic fibers can be used acetic silicone sealant bonding.
2. doors and windows, titanium alloy doors and windows, plastic steel doors and windows installation, used to caulk sealing, to strengthen the adhesion of the object.
3. Acetic Silicone sealant can be used for button plate doors and windows bonding seal.
4. variety of glass, metal, aluminum, ceramic tile, plexiglass, coated glass between the joints sealing.
5.Acetic Silicone sealant is suitable for all kinds of glass curtain wall, aluminum composite panel curtain wall, stone dry hanging and other weatherproof sealing.
6. suitable for concrete, cement, masonry, rock, marble, steel, wood, anodized aluminum and painted aluminum surface joint sealing, and in most cases do not need to use primer.
Instruction
1. Single-component products can be operated directly with a glue gun; two-component silicone adhesive needs to be mixed and used in proportion.
2. Clean the surface of the bonding object, clean up the oil, rust and so on. If necessary, you can use professional cleaning agent, and then sandpaper for proper sanding to enhance adhesion.
3. Acetic silicone sealant evenly coated bonding, bonding of two surfaces, squeeze out the air to avoid affecting the curing effect.
4. Placed at room temperature curing, after a period of time can be the next step.
5. The excess adhesive using a rag or paper towel to wipe clean, after curing can be cleaned up with a razor blade.