AR GLASS FIBRE MAT
HUIERJIE
AR
GLASSFIBRE MAT is an engineered AR-stem designed for use in the reinforcement of very thin layer (5-20 mm)
HUIERJIE AR GLASSFIBRE MESH is used by Manual laying or Mechanical molding to reinforce the areas which need mechanical strength to prevent crack.
Application:
HUIERJIE AR GLASSFIBRE MAT is available in a range of nominal weight: standard is 150g/M2. It is produced by chopping Huierjie AR-Roving into 20-50mm strands and forming into a mat with a suitable binder. The mat has an open construction to permit penetration by cement mortar. The engineered binder, which dissolves with water further, assists incorporation into a cement matrix.
HUIERJIE AR GLASSFIBRE MAT may be used as a positioned reinforcement flooring systems
MAT
Technical Dat
a
·
EXAMPLE
ARMC150-1000H
Type of glass
Alkali Resistant
(AR)
Zirconia (ZrO2) content
≥1
6
.
7
%
Filament diameter
(μ
m
)
1
+
2
Strand tex
50
5
Weight
available(g/m2)
150 225 300
WIDTH(MM)
1000
Sizing Content
9
Breaking strength
(N/150MM)
37
ARG Fiber Advantages
With the original E-glass fibers, durability was a big issue since the fiber broke down and lost strength in concrete, then the alkali-resistant Glassfibre is developed and made resistant to the high alkali corrosion through the use of zirconium-dioxide.
Huierjie ARG Fiber properties including excellent alkali -resistance with high ZrO2 content of over 16.7% , good tensile & flexural properties, high elastic modulus, freeze thaw resistance and crack fatigue with excellent impermeability properties.
Huierjie ARG Fiber used in the manufacturing of GRC cladding provides enough opportunities for architects to design ornate and complex exterior high performance & environmentally friendly building cladding solutions.