2mm*2m*20m SheetExcellent Anti-Static
Performance
Anti-Static PVC vinyl roll flooring are tough and ultra-durable solutions for heavy and very heavy traffic areas, especially recommended for applications in healthcare and education for their resistance and ease of cleaning. Composed of a single compact layer of vinyl, homogeneous and heterogeneous vinyl floors are glued to the sub-floor and welded for optimal durability and hygiene. Our acoustic versions feature a special foam underlayer to reduce sound transmission and absorb shocks.

Vinyl Rolling PVC Floor
Size: 2mm*2m*20m

it is non-reactive to residual indentation with a value ≤ 0,03 mm (EN 433). complies with EN 649 (34-43)
T wear resistance suitable for very heavy duty traffic areas
Bfl-s1 fire resistance.

About Antistatic PVC Vinyl Rolling Floor
Hedsom provides an antistatic PVC Vinyl flooring product range that has been proven to help prevent harmful electrical charge that builds up from destroying sensitive components, by dissipating the charge safely to ground.
These electrostatic dissipative (ESD) products have been specifically designed for use in cleanrooms or environments where sensitive components, gases, solvents or even explosives are handled. This would particularly be very prominent in the electronics manufacturing industry or chemical processing sector.
Offering self-smoothing, hard-wearing, chemical resistant and easy to clean properties as well as being able to withstand rigorous cleaning regimes, our ESD Antistatic PVC Vinyl Flooring Systems offer a seamless alternative to tile or vinyl finishes - creating a watertight seal that is proven to last.
Both conductive and static-dissipative flooring systems are available to meet the specific resistance requirements of the facility in query.
A vast majority of Hedsom's flooring materials, including ESD Tiles and Anti Static PVC Vinyl Rolling Floor can be specialised to provide static-dissipative and conductive properties to meet the specific resistance requirements of the facility in query. Be sure to contact one of our technical advisors to find the right solutions for your facility.
Product Parameters

( Homogeneous / Heterogeneous)
PVC
Vinyl Sheet Flooring
The homogeneous PVC
Vinyl Sheet Flooring is made of one single layer that offers vibrancy and depth of the colour.
It is a new type of light body floor decoration material which is very popular in the world today. Heterogeneous flooring also offers low maintenance cost,
It is widely used in hospitals, nursing homes, schools, office buildings, factories, public places, businesses, sports venues and other places. Both homogeneous and heterogeneous flooring are affordable flooring solutions when compared with
other flooring materials.These benefits make these two types of vinyl flooring a great choice for
heavy traffic areas.
Heterogeneous flooring is a
multi-layer structure that includes but is not limited to 4 to 5 layers. This type of flooring can include a printing layer, glass fiber layer, wear layer, etc. By using different materials in the heterogeneous vinyl flooring, the flooring becomes more diverse.
Product Specification
Classification
Product Performance
Installation Instructions

If the floor will consist of multiple PVC vinyl sheets, then you have to cut them out first with 10 cm of extra length and number them. The sheets are positioned so that they align based on the light and the wall with a window. If the floor has any patterns, then you should match them with the sheets. The joints should be cut with an overlapping method. Overlap the sheets with around 2-3 cm and then cut through both sheets. This way you get the perfect joint.
Clean the base floor properly with a vacuum cleaner and apply the glue with a filling scraper. I recommend using one that has zig-zag edges. Next, add the PVC sheets. After that, smoothen the sheets from the inside out. This removes air bubbles underneath and evens out the glue. If there's any excess glue that pops onto the top of the PVC, then clean it up before it hardens.
Once the entire floor has been covered, you should then cut off the excessive parts of the vinyl. The excessive material should be pushed into the corner of the wall and cut at a 45-degree angle with a sharp knife. You can use a precision square to make it easier.
Next, cut the holes for pipes or anything that comes out from the floor. These cuts should be smaller than the size of the object. Just use a hot air gun to extend it. This will make the vinyl hug the object, and you'll have a tight fit.
Avoid walking on the fresh new floor for 24 hours.

About Hedsom:
Hedsom is a professional supplier of PVC vinyl flooring
. Our factoris based in Foshan and Jiangsu, and our sales center is located in Guangzhou.We specialized in PVC floor, PVC Heterogeneous Rolling Floor, PVC Homogeneous Rolling Floor , SPC flooring,
luxury vinyl tile, sports flooring,carpet and raised flooring. Our products are tested and certified for quality to give customers the best performance and durability.With over 10 years of experience, we continue to provide quality flooring for all household, offices, HEALTHCARE,EDUCATION,INDUSTRY and
other COMMERCIAL projects all over the world.

1. who are we?We are based in Guangdong, China, start from 2016,sell to Domestic Market(75.00%),Southeast Asia(6.00%),North America(5.00%),South America(2.00%),South Asia(2.00%),Mid East(2.00%),Eastern Europe(1.00%),Oceania(1.00%),Southern Europe(1.00%),Africa(1.00%),Northern Europe(1.00%),Central America(1.00%),Western Europe(1.00%),Eastern Asia(1.00%). There are total about 11-50 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?PVC Floor, Vinyl Rolling flooring,Sports floor,rasied floor4. why should you buy from us not from other suppliers?Shareholders focus on floor industry more than 20 years. Shareholders have more than 10 factories to producce different kind of floor products and accessories. Proffesional design, good quality, directly factory price and good services5. what services can we provide?Accepted Delivery Terms: FOB,CIF,EXW,FCA;Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY;Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,Western Union;Language Spoken:English,Chinese
We are based in Guangdong, China, start from 2016,sell to Domestic Market(75.00%),Southeast Asia(6.00%),North America(5.00%),South America(2.00%),South Asia(2.00%),Mid East(2.00%),Eastern Europe(1.00%),Oceania(1.00%),Southern Europe(1.00%),Africa(1.00%),Northern Europe(1.00%),Central America(1.00%),Western Europe(1.00%),Eastern Asia(1.00%). There are total about 11-50 people in our office.
Always a pre-production sample before mass production;
Always final Inspection before shipment;
PVC Floor, Vinyl Rolling flooring,Sports floor,rasied floor
Shareholders focus on floor industry more than 20 years. Shareholders have more than 10 factories to producce different kind of floor products and accessories. Proffesional design, good quality, directly factory price and good services
Accepted Delivery Terms: FOB,CIF,EXW,FCA;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,Western Union;
Language Spoken:English,Chinese