





Preview
基本信息产品详情证书
基本信息
型号编号 | AASHTO-M249 |
生产标准 | AashtoM249 |
绑定器内容 | 最小值18% |
玻璃微珠含量 | 至少30% |
二氧化钛含量 | 仅限白色,优惠10% |
密度 | 约2.0克/立方厘米 |
软化点 | 90摄氏度以上 |
使用温度 | 180-220摄氏度 |
可选项颜色 | 白色/黄色/蓝色/红色/绿色/黑色 |
运输包 | 复合塑料袋 |
规格 | 每袋25公斤 |
商标 | 途安交通 |
起源 | 中国 |
商品编码 | 3824999999 |
生产能力 | 每天150吨 |
产品详情
Product Description
Preview
1. Features
Δ Excellent adhesive property, stability and long-term reflective ability.
Δ
Excellent anti-micro-cracking performance and weather resistance ability.
Δ
Excellent application performance:
Δ
Fast dry, good flow property, and has good anti-skid performance.
Δ Excellent adhesive property, stability and long-term reflective ability.
Δ
Excellent anti-micro-cracking performance and weather resistance ability.
Δ
Excellent application performance:
Δ
Fast dry, good flow property, and has good anti-skid performance.
Preview

Preview
2. Application of film thickness & coverage:
Application requires the skills of trained personnel and specialized equipment. It must be melted to a temperature of at least 200ºC(392ºF), mixed well and applied in a molten/liquid state to the pavement. General marking thickness is 1.5-3.0mm (recommended thickness 2.0mm). One ton yields approximately 200~250 m
2
according to different application method, thickness and situation of road surface.
Application requires the skills of trained personnel and specialized equipment. It must be melted to a temperature of at least 200ºC(392ºF), mixed well and applied in a molten/liquid state to the pavement. General marking thickness is 1.5-3.0mm (recommended thickness 2.0mm). One ton yields approximately 200~250 m
2
according to different application method, thickness and situation of road surface.
Preview

Preview
3. Application of Glass Beads
It is important that the specified film thickness is achieved in order to maximise glass bead retention and the wearing properties of the marking.
Δ
Drop-on glass beads should comply with required standard, applied at the rate of 0.3~0.4kg per sq. meter, require a dry film thickness of 1.8 mm for optimum retroreflectivity. It can be applied at a film build of 1.5~3.0mm.
Δ
To ensure maximum bead adhesion retention, the beads must be applied immediately after spraying on surface of road, then the marking needs to be protected from traffic until it dries. (Like above picture)
4. Pavement Preparation
All surfaces must be clean, dry and free from oil, grease, antifreeze, loose sand, aggregate and chipping/peeling existing striping. Otherwise it will affect the adhesion between the coating and the road, thereby reducing the service life of the coating. Pavement surface temperature at the time of application should be 10ºC(50ºF ) at least or keep rising. Any curing compounds used on new concrete pavement must be mechanically removed off prior to applying paint and use of a primer is strongly suggested. New asphalt pavement should be allowed to cure for a minimum of 14 days to maximize adhesion and durability. When in doubt, always test adhesion.
It is important that the specified film thickness is achieved in order to maximise glass bead retention and the wearing properties of the marking.
Δ
Drop-on glass beads should comply with required standard, applied at the rate of 0.3~0.4kg per sq. meter, require a dry film thickness of 1.8 mm for optimum retroreflectivity. It can be applied at a film build of 1.5~3.0mm.
Δ
To ensure maximum bead adhesion retention, the beads must be applied immediately after spraying on surface of road, then the marking needs to be protected from traffic until it dries. (Like above picture)
4. Pavement Preparation
All surfaces must be clean, dry and free from oil, grease, antifreeze, loose sand, aggregate and chipping/peeling existing striping. Otherwise it will affect the adhesion between the coating and the road, thereby reducing the service life of the coating. Pavement surface temperature at the time of application should be 10ºC(50ºF ) at least or keep rising. Any curing compounds used on new concrete pavement must be mechanically removed off prior to applying paint and use of a primer is strongly suggested. New asphalt pavement should be allowed to cure for a minimum of 14 days to maximize adhesion and durability. When in doubt, always test adhesion.
Preview

Preview
5. Expiry & Storage & Packing
The shelf life of the product is one year from date of manufacture with proper storage. Proper storage includes inside shaded, dry and ventilated or covered to prevent from moisture, and below 38°C (100°F). Outside storage for short intervals is acceptable as long as the material is kept dry. Prolonged outdoor storage or high temperature storage may cause material deterioration. It is packed by 25kg compond-plastic bag (General bag) or EVA melted bags(Customized bag).
Company file
1. Influential Enterprise Scale
Up to now, the company has established three machinery factories
respectively in Zhengzhou, Nantong and Jining. The total construction area reach 100,000 square meters, mainly engaged in the R&D and production of road marking machine, road clearing machine, road crack sealing machine, small roller, sweeper, industrial lighting vehicles and other small pavement machine.
The shelf life of the product is one year from date of manufacture with proper storage. Proper storage includes inside shaded, dry and ventilated or covered to prevent from moisture, and below 38°C (100°F). Outside storage for short intervals is acceptable as long as the material is kept dry. Prolonged outdoor storage or high temperature storage may cause material deterioration. It is packed by 25kg compond-plastic bag (General bag) or EVA melted bags(Customized bag).
Company file
1. Influential Enterprise Scale
Up to now, the company has established three machinery factories
respectively in Zhengzhou, Nantong and Jining. The total construction area reach 100,000 square meters, mainly engaged in the R&D and production of road marking machine, road clearing machine, road crack sealing machine, small roller, sweeper, industrial lighting vehicles and other small pavement machine.
Preview

Preview
2. Continuously Accumulation of
Production, R&D Strength.
Established three automatic production lines, due to accurate ratio of raw material, all-round uniform mixing, intelligent running and management in whole process, automatically abnormal quality indication at multi-node, to ensure produced thermoplastic paint with excellent internal quality. Daily capacity can reach 150tons.Large production scale, low labor cost, stable quality, to ensure that our products are more and more competitive on price, supply ability and quliaty.
Production, R&D Strength.
Established three automatic production lines, due to accurate ratio of raw material, all-round uniform mixing, intelligent running and management in whole process, automatically abnormal quality indication at multi-node, to ensure produced thermoplastic paint with excellent internal quality. Daily capacity can reach 150tons.Large production scale, low labor cost, stable quality, to ensure that our products are more and more competitive on price, supply ability and quliaty.
Preview

Preview
3. Excellent Talent Team
TOURANTRAFFIC has an enterprise management team with rich industry experience and innovative spirit. It has accumulated and attracted nearly 100 professional engineering machinery design and manufacturing talents and gathered a large number of professional industrial workers to fully support the continuous investment and technology accumulation of TOURANTRAFFIC in the industry.
TOURANTRAFFIC has an enterprise management team with rich industry experience and innovative spirit. It has accumulated and attracted nearly 100 professional engineering machinery design and manufacturing talents and gathered a large number of professional industrial workers to fully support the continuous investment and technology accumulation of TOURANTRAFFIC in the industry.
Preview

Preview
4. Exported to over 35 countries
Recently, our products are exported to over 35 countries in Southeast Asia, South America, The Middle East, North Africa and Europe. To be the " Reliable Partner " of clients with our quality products, customer satisfaction and solution service is our consistent service concept. TOURANTRAFFIC is getting stronger every day in this field in above countries and regions.
Recently, our products are exported to over 35 countries in Southeast Asia, South America, The Middle East, North Africa and Europe. To be the " Reliable Partner " of clients with our quality products, customer satisfaction and solution service is our consistent service concept. TOURANTRAFFIC is getting stronger every day in this field in above countries and regions.
Preview

Preview
5. Packing & Delivery
All standardized packaging, suitable for long distance transportation by Land or Ocean. Professional logistics operation team, convenient and fast delivery to all over the world.
All standardized packaging, suitable for long distance transportation by Land or Ocean. Professional logistics operation team, convenient and fast delivery to all over the world.
Preview

Preview

Preview
FAQ
Preview
1. About Price:
The price is negotiable. It can be changed according to your quantity or package. When you are making an inquiry, please let us know the quantity you want.
2.About Sample:
Samples are provided if less than 2kgs and is Free, but the air freight is collect or you pay us the cost in advance.
3.About MOQ:
The MOQ for thermoplastic painnt is 25tons (FCL); If you need to buy other products, you can appropriately reduce the quantity of paint, to load all in one 20 feet container.
4.About OEM:
Welcome, you can send your own design and LOGO on bags, we can use your Trademark or Brand instead of the original one.
5.About warranty:
We are very confident in our products, and we pack them very well, so usually you will receive your order in good condition. But due to long time shipment there may be 1% some damage to the bag. It should be acceptable to the buyer.Any quality issue, we will deal with it immediately.
6.About Payment or other question:
Pls email us or chat with us online directly.
The price is negotiable. It can be changed according to your quantity or package. When you are making an inquiry, please let us know the quantity you want.
2.About Sample:
Samples are provided if less than 2kgs and is Free, but the air freight is collect or you pay us the cost in advance.
3.About MOQ:
The MOQ for thermoplastic painnt is 25tons (FCL); If you need to buy other products, you can appropriately reduce the quantity of paint, to load all in one 20 feet container.
4.About OEM:
Welcome, you can send your own design and LOGO on bags, we can use your Trademark or Brand instead of the original one.
5.About warranty:
We are very confident in our products, and we pack them very well, so usually you will receive your order in good condition. But due to long time shipment there may be 1% some damage to the bag. It should be acceptable to the buyer.Any quality issue, we will deal with it immediately.
6.About Payment or other question:
Pls email us or chat with us online directly.
Preview
证书
标题:营业执照



Preview
热塑性漆白色或黄色符合AASHTO M249标准
¥5936.8 ~ ¥6154
建筑材料产业链 · 涂料及粘合剂 · 道路标线漆
产地中国