Waste Tire Recycling Rubber Machine / Rubber Powder Making Machine
Introduce of waste tire recycling rubber machine:
The full-auto scrap rubber tires recycling machine line includes rubber crusher machine and accessory machines,accessory machines consist of debeader,whole tire cutter,whole tire shredder,conveyor equipments,shaking screen,magnet separator,fiber separator,if you need the fine powder,you still need the fine grnder machine.
1.To granulate radial tires into fine rubber crumb of 40~120 mesh with steel and fiber completely
recycled at ambient temperature.
2.The input is whole tires,after the processing,steel is completely separated and fiber can be
separated up to 99% or above.The finish product is high and competitive in the market.
3.Tight construction, small space and simple technique flow.
4.Low energy-consuming and good performance-cost ratio
5.Hight automatization, fewer labours requirements.
6.Reasonable construction,easy operation and low rate of breakdown
7.Environmental-protection,no pollution(no waste gas,no waste residue,no polluted
water),meeting the environmental requirements of the governmentPictures of waste tire recycling Machine:
the whole line of full-autometic waste tire recycling machine:
Main machine-whole tire shredder(ZPS-900/ZPS-1200):

1)
Model:
ZPS1200
2)
Size
of
feeding:
≤1200
whole
type
3)
Size
of
Discharge:
<
=60*60mm
4)
Capacity(kg/h):
2500-3000
5)
Main
motor
(2
motors
):
55KW*2=110KW
,
6)
Dimension(L*W*H)(m)
:
3.8*2.1*3.5
7)
Number
of
knife:
20
PCS
8)
Rotary
speed:
about
28
r/min
9)
Weight(t)
:16500kgs
10)
REMARKS:
10.1
gear
box:
hardness
teeth,
Model:
ZSY315,
not
ZQ
series
10.2,
knives:
material:
H3
,
Germany
standard
,
forged,
heat
treatment
by
high
frequency,
Main machine-tire crusher machine(XKP-400/SKP-450/XKP-560)

Analysis
for
output
:
1).XKP400
rubber
crusher:
Output:
4500-6000kg/24
hour
for
about
20
mesh
granule.
2).XKP450
rubber
crusher:
Output
:7000-12000kg/24
hour
for
about
20
mesh
granule.
3).XKP560
rubber
crusher:
Output
:
10000-17000kg/24
hour
for
about
20
mesh
granule.other main machines
debeader:
tyre cutter:
full-auto waste tire recycling line:

Characteristic of waste tire recycling machine:
1. Environmental protection and energy saving: no waste water, waste gas, using
circulating water cooling. Plasticizing powder
consumption per ton of 100-170KW;
2. Safety: atmospheric pressure conditions of production, the operator feeding on the ground;
3. Easy operation: PLC control, man-machine interface operation;
4. Each module has a real-time measurement value of feeding, discharging, water temperature into the PLC control system;
5. Each module individually sets temperature, temperature error within ± 1 °C;
6.Using electromagnetic heating or heat conduction oil furnace in two ways;
7.Products do not stick on conveyer, no need to clean up, with production while cleaning function;
8.Process parameters of memory function, memory function formula, etc;
9.Easy installation and maintenance, safe and reliable and remote maintenance.Single hook debeader:
Model:
LS
1200
Capacity:20-40
tires/hour
Pulling
force(T):
13
Max.tire
diameter
1200mm
Power(KW):
11KW
Stroke
distance:
1300mm
Dimension(L*W*H):
3.6*0.78*1.02
Weight:
3500KGTire cutter machine:
Model
:WTC1200
Capacity:-3500kg/h
Motor
power:5.5kw
Tire
range:Max
1200mm
dimension:2080*1000*2130mm
Finber separator:
Model
:FS110
capacity:500kg/h
dimension:1.5*1.5*3.4(m)
weight:about
1.5T