Product comparison and evaluation
1.First point: LH side is Archer one, our pin is copper coating by silver. And others is use the normal copper.

2. different point
The connecting wiring, Archer we use is like OE, temperature resist up to higher 105 C, lower -
35 C like the LH side one in the picture.
The competitor one is use the normal type. pool quality.

3.different point.
The connector we use with an extra magnetic
holder like OE , Archer one is the picture RH side
And our competitor one is like the LH side of the picture, nothing protect, just pin out.
4different point.
The socket we use like the RH side one, with one lock position, to secure the locking position in right position, will not lose.
The ligh yellow one at LH side are Archer competitor
one, without this lock gap, easy to lose, and will have no function.5.different
point
The RH side is Archer one, we do like 100% OE, use the insulation tape to close the wiring, enausre no moisture
goes in, cause the rust, once rusty start, the resist wrong, will have no function.
The LH side are the competitor. Simple one.

6th
point
Our wiring like the RH side one, is high grade wiring, temperature resist reach 105C.
The LH side are our competitor one is use the 80 C middle class wiring.

7th
point.
The main flat wiring we are using is like OE think less
0.21mm, like the lower picture one.
Our competitor one is use the 0.17mm for normal computer use, life time is much shorter.

8th
point.Turn the clock spring, our one is very silent, top and bottom plastic position is close very well, no noise.Our competitor are big gap in the top and lower plastic parts, easy to lose, and when you turn you will heard noise, and that easy to lose when steering wheel turn.
Hot Sales OEM Number for Clockspring