School Chalk Making Machine
Introduction :This chalk machine has high production efficiency, greatly reduces labor intensity, and saves labor and materials. The chalk produced is seamless, without skinning, and has a high finish. It really achieves energy saving, material saving, labor saving and high efficiency; and it is easy to operate. It is an ideal replacement product for the chalk production industry.Feature :
1. Mold specifications: 800pcs/mold, chalk size 10 * 8 * 75mm, other sizes can be customized
2. Mold release method: Use a lever to release 800 pieces at once
3. Material usage: gypsum powder, 3kg every mold
4. Water supply mixing method: quantitative automatic water supply, electric mixing, mixing time 3/5 seconds/time
5. Mold release time: 2.5-5 minutes per mold
6. Power supply: 220V 370W-550W
Note: Anyone who purchases our chalk machine will receive free chalk making formula and operation skills.Chalk production process1. Mold evenly brush oil, brush back and forth with a wide brush, brush the new mold should be more oil.2. The mold plate moving up and down a few times, the screw top and the bottom plate comes into contact.3. Turn on the water, turn on the water with a movable foot switch pedal to pedal in the end, until the water in the water last.(First mold first feed, add water)4. Addition, the quantitative good gypsum powder into the mixing bucket.5. Mixing, stirring for 10-20 seconds to start the motor.6. Put the pulp, put a good brush oil stirred to die bottom of the barrel, hit the switch to open the pulp slurry was stirred well into the mold until the stream last.7. Calibrating with a plastic scraper to scrape the pulp mold hole, scrape out the remaining pulp mold mouth gelling.8. A mold, a new mold die not too late. Chalk can feel a little hard to top 2-5 mm, 1 to 2 minutes over again ejection.Specification:
Product show :