Good Wear Resistance Metal Screen Mesh Crimped Wire Mesh Mining Vibrating Sieving Mesh High Tensile Strength Polyurethane Mesh Screen

Mn 65 steel Vibrating Screen Mesh
Applications:Wet applications but may also be applied in dry screensMaterial:
steel wire,45#, ,65Mn,high steel wire
Material.Size:305mm*610mmColour:Painted
Quotation info needed:length, width, thickness, aperture size and quantity
Advantage:
1. High strength
2. High resistance
3. Accept customized variety size.

Wear-resistant high-frequency screen
Applications:Wet applications but may also be applied in dry screensMaterial:Wear resistant polyurethaneSize:from 700mm*500mm to 5500mm*1400mmQuotation info needed:length, width, aperture size and quantity

Dehydration sieve plate
Applications:Wet applications but may also be applied in dry screensMaterial:polyurethane with iron skeleton insideSize:305mm*610mmColour:yellow, red ,orange or greenQuotation info needed:length, width, thickness, aperture size and quantity.
Application of vibrating screen mesh:Good Wear Resistance Large Bearing Capacity Mining Vibrating Sieving Mesh High Tensile Strength Polyurethane Fine Dewatering MeshVibrating screen mesh can be used as screen deck in the vibrating screen,crusher screen,mining screen,quarrying screen and other machines.It is widely used in vibrating screen machines to filter and separate sands,gravel,coal,stones,rocks,chemical,rocks,iron,and other materials.Vibrating screen Mesh.Polyurethane sieve plate has the characteristics of good wear resistance, long service life, high screening quality, low noise, strong self-cleaning ability, good screening performance and wide application range. It can be used in metallurgy, coal, mining, building materials, water conservancy, petroleum and other industries, and can be used for material classification, dehydration, medium removal and other operations.It is also called sand and stone dewatering screen, mining dewatering screen, Mud dewatering screen, tailings dewatering screen, etc..Wet screening:
The wet screening has two purpose series: classification anddewatering
This combination is widely applied int the fields of oreconcentration, coal preparation, construction materials andchemical industry etc.Dry screening
The dry screening is for fine classification(-10mm) of coal, brickmaking, chemical industry, fertilizer etc.The screen surface can be designed as single-channel anddouble-channe
Vibrating screen mesh can be used as screen deck in the vibrating screen,crusher screen,mining screen,quarrying screen and other machines.It is widely used in vibrating screen machines to filter and separate sands,gravel,coal,stones,rocks,chemical,rocks,iron,and other materials.Vibrating screen Mesh.Polyurethane sieve plate has the characteristics of good wear resistance, long service life, high screening quality, low noise, strong self-cleaning ability, good screening performance and wide application range. It can be used in metallurgy, coal, mining, building materials, water conservancy, petroleum and other industries, and can be used for material classification, dehydration, medium removal and other operations.It is also called sand and stone dewatering screen, mining dewatering screen, Mud dewatering screen, tailings dewatering screen, etc..Wet screening:
The wet screening has two purpose series: classification anddewatering
This combination is widely applied int the fields of oreconcentration, coal preparation, construction materials andchemical industry etc.Dry screening
The dry screening is for fine classification(-10mm) of coal, brickmaking, chemical industry, fertilizer etc.The screen surface can be designed as single-channel anddouble-channe

Shandong Huimin Lusheng Metal Products Co., Ltd. is a professional manufacturer of screening equipment, crusher and accessories of all equipments etc.the company has developed to be a professional team integrated with R& D and production system. We can design and customize
all kinds of mining machinery according to customer requirements: vibrating screen, crusher and spare parts etc.
We will make full use of our strong research and development & production capacity, sound quality assurance system, good reputation and after service to satisfy all customers′ requirements. If you are interested in our products, please feel free to contact us timely. .welcome friends from all walks of life to visit, guide and business negotiation.
Our Advantages
1. High efficiency, low energy consumption;
2. Simple structure, convenient maintenance;
3. Fully closed structure without dust pollution;
4. Stable working station and smooth operation;
5. High utilization rate of screen, large unit area, not easy to block, but easy replacement of screen.6. High-precision screening reach to 96% or above, large processing capacity, etc
Our Service
1.Pre-sale services:
(1)Select equipment model;
(2) Design and manufactLire products according to clients' special requirement;
(3)Train technical personnel for dients.2.Services during the sale:
(1) Pre-check and accept products ahead of delivery;
(2)help clients to draft solving plans.3. After-sale services:
(1) Assist dients to prepare for the first construction scheme;
(2)Install and debug the equipment;
(3) Train the first-line operators on site;

Q1.Are you a manufacturing or trading company?
A1.We are a manufacturer/ factory, established in 2010.
Q2. How long is the warranty? Does your company supply the spare parts?
A2.One year(Calculated from the equipment arrives the customer's side.). Spare parts for you at the lowest cost.
Q3.What about Warranty? What will we do if the machine is broken down?
A3.The warranty period for all of structural and mechanical equipment is one year. The warranty period for all electric motors is half one year. Wear parts are not covered by warranty unless the component part is found to be flawed.
Q4.What is your payment method?
A4.30% deposit in T/T advance, 70% balance before shipment.
Q5. If I need the complete crushing plant can you help us to build it?
A5.We can help you set up a complete production line and provide related professional advice. We had already built many mining projects in China & Overseas.
Q6.What's the after sale service of your company?
A6.We will provide foundation drawing and video to the clients for installation. Besides, we can provide guidance service for installation and operation of workers, etc.
Q7. Can your company provide wearing parts?
A7.We can deliver you the spare parts within 10 working days after your order. If your equipment are not manufactured by our company, please provide us the wearing parts drawing or number.
Q8.What should we need to do for if we want to get a best quotation?
A8.If you want us recommend a suitable type for you; please let us know the below informations:
1).Mesh length: _____
2).Mesh width: _____
3).Mesh Height:_____
4). Hole size _____
5). Quantity:_______
Q1.Are you a manufacturing or trading company?A1.We are a manufacturer/ factory, established in 2010.Q2. How long is the warranty? Does your company supply the spare parts?A2.One year(Calculated from the equipment arrives the customer's side.). Spare parts for you at the lowest cost.Q3.What about Warranty? What will we do if the machine is broken down?A3.The warranty period for all of structural and mechanical equipment is one year. The warranty period for all electric motors is half one year. Wear parts are not covered by warranty unless the component part is found to be flawed.Q4.What is your payment method?A4.30% deposit in T/T advance, 70% balance before shipment.Q5. If I need the complete crushing plant can you help us to build it?A5.We can help you set up a complete production line and provide related professional advice. We had already built many mining projects in China & Overseas.Q6.What's the after sale service of your company?A6.We will provide foundation drawing and video to the clients for installation. Besides, we can provide guidance service for installation and operation of workers, etc.Q7. Can your company provide wearing parts?A7.We can deliver you the spare parts within 10 working days after your order. If your equipment are not manufactured by our company, please provide us the wearing parts drawing or number.Q8.What should we need to do for if we want to get a best quotation?A8.If you want us recommend a suitable type for you; please let us know the below informations:1).Mesh length: _____2).Mesh width: _____3).Mesh Height:_____4). Hole size _____5). Quantity:_______
Q9.What services are available?
A9.Professional engineer design the production line for you.
Pre-check and accept products before delivery.
Professional technical guidance for installation
https://sievingmachine.en.made-in-china.com/product-list-1.html