





Preview
基本信息产品详情证书
基本信息
型号编号 | FS-SAT |
玻璃纤维类型 | 玻璃布 |
碱含量 | 无碱 |
产品名称 | 耐碱玻璃纤维网 |
材料 | 百分之百C型玻璃E型玻璃纤维纱 |
纱线类型 | 连续真空 |
认证 | En1869:1997 |
重量 | 每平方米60克至300克 |
颜色 | 白色、蓝色、黄色、橙色、绿色 |
长度 | 作为请求 |
宽度 | 50毫米至2米 |
网格开口 | 4*4毫米,5*5毫米,10*10毫米,3*3*6毫米 |
常温 | 负七千减五百五十 |
抗拉强度 | 700-2900 牛/毫米 |
编织类型 | 雷诺 |
胶粘内容 | 百分之十四到百分之十六 |
网格数 | 2.5, 5, 6 |
交通包裹 | 防水包装 |
规格 | 按照要求 |
商标 | FS |
起源 | 中国 |
商品编码 | 7019669090 |
生产能力 | 每天1万卷 |
包装尺寸 | 1.00cm*1.00cm*1.00cm |
包装总重量 | 1千克 |
包装尺寸 | 1.00cm × 1.00cm × 1.00cm |
包总重 | 1.000千克 |
产品详情
Product Description
Preview
Fiberglass Drywall joint Tape
is cut by alkaline-resistant fiberglass mesh which is treated by adhensive latex. It owns good performances, like good softness, high stickness, easy application, it gives you the best solution for the wall problems like wall cracks, plasterboards joints, wall holes, etc. and it is the ideal material for the dry wall and ceiling problems.Joint Tape conceals and reinforces gypsum board joints. The tape is buffed on both sides to ensure the best working qualities and bond.Specification:Width (mm): 25, 35, 48, 50, 100, 150, 200, 1000, 1200Length (m): 10, 20, 30, 45, 90, 153Mass: From 55 to 85g/sq. Meter.Mesh: 8x8 or 9x9mesh/inch.Colour: White, yellow, blue etc...Jumbo roll: 1200mm Xx450m or 900mDrywall seaming tapes as well as private label and unlabeled tapes.Each roll is shrink-wrapped, or plastic hand bag.Other specification are available upon request.Testing standard: ASTM-D579How to use:1. Wall must be clean and dry;2. Center and apply tape over the length of the joint and pressing firmly;3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.4. Let dry completely, then sand slightly.5. Apply sufficient thin finishing coats to produce a smooth wall surface.6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.
is cut by alkaline-resistant fiberglass mesh which is treated by adhensive latex. It owns good performances, like good softness, high stickness, easy application, it gives you the best solution for the wall problems like wall cracks, plasterboards joints, wall holes, etc. and it is the ideal material for the dry wall and ceiling problems.Joint Tape conceals and reinforces gypsum board joints. The tape is buffed on both sides to ensure the best working qualities and bond.Specification:Width (mm): 25, 35, 48, 50, 100, 150, 200, 1000, 1200Length (m): 10, 20, 30, 45, 90, 153Mass: From 55 to 85g/sq. Meter.Mesh: 8x8 or 9x9mesh/inch.Colour: White, yellow, blue etc...Jumbo roll: 1200mm Xx450m or 900mDrywall seaming tapes as well as private label and unlabeled tapes.Each roll is shrink-wrapped, or plastic hand bag.Other specification are available upon request.Testing standard: ASTM-D579How to use:1. Wall must be clean and dry;2. Center and apply tape over the length of the joint and pressing firmly;3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.4. Let dry completely, then sand slightly.5. Apply sufficient thin finishing coats to produce a smooth wall surface.6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.
Preview

Preview

Preview

Preview
Product Parameters
Preview
Detailed Photos
Preview

Preview

Preview

Preview

Preview
证书
标题:ISO 9001

Preview