Product Information

1. Single component, easy to use, good extrudability and thixotropy in the temperature range of 4°C ~ 40°C, can be applied
directly by using a glue gun;
2. After curing, it will not become brittle, harden or crack at low temperatures of -30°C. It will not soften or degrade at high
temperatures, but will shrink to a certain extent and increase in hardness;
3. Excellent weathering resistance, aging, UV, ozone and water resistance;
4. Excellent resistance to high and low temperatures, will not become brittle, hardened or cracked at -30°C after curing
and will
not become soft and degraded at high temperatures, but there is a certain shrinkage, and the hardness has increased;
5. Good adhesion, forming a strong seal with most building materials when cured without the need for a primer;
6. Good compatibility with other neutral silicone adhesive;
1. Single component, easy to use, good extrudability and thixotropy in the temperature range of 4°C ~ 40°C, can be applieddirectly by using a glue gun;2. After curing, it will not become brittle, harden or crack at low temperatures of -30°C. It will not soften or degrade at high
temperatures, but will shrink to a certain extent and increase in hardness;3. Excellent weathering resistance, aging, UV, ozone and water resistance;4. Excellent resistance to high and low temperatures, will not become brittle, hardened or cracked at -30°C after curing
and will
not become soft and degraded at high temperatures, but there is a certain shrinkage, and the hardness has increased;5. Good adhesion, forming a strong seal with most building materials when cured without the need for a primer;6. Good compatibility with other neutral silicone adhesive;
Instructions for use
1.Before construction, the glass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.3.Adjustment should be completed within ten minutes after dispensing.4.The product room temperature curing, surface drying time: 45Min, full curing time: 24h.5.Application temperature range: -40ºC-+100ºC.
.
1.Before construction, the glass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.3.Adjustment should be completed within ten minutes after dispensing.4.The product room temperature curing, surface drying time: 45Min, full curing time: 24h.5.Application temperature range: -40ºC-+100ºC..
Storage
1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).2.Construction temperature of 5-32 ºC is preferred.3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.

Factory display & Product packaging
Qingdao Shengren Import and Export Co., Ltd. specializes in the research, development, production, and sales of a variety of sealants. Our leading products include a series of structural silicone sealants and neutral weather-resistant silicone sealants, which are widely used for indoor and outdoor sealing, bonding, and structural assembly in various large and medium-sized curtain wall systems. With our advanced R&D capabilities, we have produced more new products, such as door and window silicone sealants, decorative sealants, and industrial sealants. Our company covers an area of 27,000 square meters and is equipped with modernized production, testing, and laboratory equipment. We have a highly qualified team of production, sales, and management professionals, with strong technical strength. Our production processes and product quality have reached a leading domestic level. Thanks to our advanced research technologies, laboratory, dedicated product development team, and well-equipped modern production lines, we can also offer OEM services, and we have accumulated extensive experience in providing OEM services. Our high-quality products have gained the trust of clients from Europe, the United States, the Middle East, Southeast Asia, and other regions.

1.How can you guarantee the quality?
Firstly, We have rigiours quality test system. Secondly, we can promise order quality is same with sample, if there is any qualityproblem we can replace goods.2. How can I get a sample?Contact us for free samples. Delivery cost is to be paid by clients.3.What is the minimum order quantity?1 cartons for our brand, 200 cartons for your brand.4.Can you provide OEM service?Yes, and we also can offer you free design.5.What is delivery time?About 15 days working days.
Warnings
1. Ensure that the area where the sealant is being applied is well-ventilated.2. If the uncured adhesive comes into contact with your eyes, immediately rinse them thoroughly with water and seek medical attention.3. Before using this product, users must conduct compatibility and adhesion tests with the materials to be contacted, and confirmthat they meet the standards before starting the application.4. Keep the product out of reach of children.