Product Specifications:
1-Front 4K Resolution Rear 1080P
2-FNO 1.5
3- 3.2 inch LCD Screen
4-AltoBeam 2.4GHz Wi-Fi
5-Image Sensor 6132,1/2.9"
6-Lens 2G2P
7-Video Format H.264 code TS format
8-Video resolution rate
9-Power Supply DC 5V 2A

Name Parameters
Voltage DC11.6-20V
Current ≤350mA (DC12V)
LCD Screen 3.2 inch Super clear screen
LCD screen resolution 268 * 800
Front Camera 1/2.9" (2G2P) 170 degree wide angle lens
Rear Camera 1/3" (2G2P) 170 degree wide angle lens
Video format H.264 code,TS format saved
Video resolution ratio 4K(3840*2160),2K(2560*1440),1080P(1920*1080)
Photo format JPEG
Microphone Built in
Speaker Internal
WIFI 2.4GHz Wi-Fi
APP Viidure
Storage card Micro SD C10 (Max support 128GB)
Main power supply connections Type-C 5V
Working environment temperature -25ºC ~ +70ºC
storage temperature -30ºC ~ +85ºC
Working environment temperature 15~65%RH

1. When taking videos, the red light icon in the upper left corner is flashed, then it`s in normal working condition; if there is no red light icon flink, indicate it`s not in the video status.

2. If the dash cam does not insert the card, when the dash cam starts or click the video, the interface will prompt "no memory card". Please insert the auentic TF card.

3. Before the user prepares to leave after stopping the engine, be sure to observe whether the streaming media is all turned off, to make sure that the streaming media has been powered off.

4,Pull out the card directly when the dash cam is working will have the risk of damage to the dash cam (this operation is not recommended to use), it will have the risk of product system mistake and confusion;The normal way to pull out the card should be after turning off the dash cam.