HM5201S Civil current type water pump pressure sensor

Civil current type water pump pressure sensor is a current output solution,Civilian current solution, direct outlet (within 400mm).

The pressure sensor for civilian current type water pumps is always installed by installing the sensor on the base. There is no buffer device added to the diaphragm, and some transmitters usually use snap rings to position the sensor.

The pressure sensor component of the water pump has the following beneficial effects: reliable performance, high stability, and no diaphragm damage; Resistant to pipeline impurity corrosion; Good anti icing performance; Small size, low power consumption; The water pump motor has good anti electromagnetic interference performance.

The pressure transmitter component of the water pump adopts a control method to continuously read the working pressure of the water pump, and automatically set the stop pressure of the water pump by increasing the starting pressure of the water pump; It does not require users to manually set the stop pressure of the water pump, which improves the level of automation and improves the efficiency of the water pump. The accuracy of stopping pressure setting can reduce the frequency of starting and stopping the water pump; It also provides a control method for automatically setting the starting pressure of the water pump, further improving the degree of automatic control of the water pump and reducing user operation.

Function and Features
A variety of options are available to meet different needs.
Accurate pressure measurement, high reliability, high stability, high cost performance.
Using dedicated amplifier circuit and excellent temperature compensation technology.
High sensitivity and fast response speed.
CE, ROSH certification.

Work environment
Medium temperature minimum value -40 ° C Maximum value 120 ° C
Storage temperature minimum value -40 ° C Maximum value 85 ° C
Electrical characteristics
power supply 24VDC (customizable) Current output 4~20mA
Overvoltage voltage (proportional) 30VDC reverse protection 30VDC
Load Resistance <700Ω@24VDC
Working characteristics
measuring range 0~3~20bar (customizable) Overload pressure 150% FS
Static accuracy ±1.5% @ FS (customizable) Burst pressure 300% FS
Measurable medium Non corrosive gases or liquids Comprehensive error ±3.0% FS (customizable)
Mechanical performance
Protection level IP65 Pressure interface G3/8 (customizable)

1.The measuring medium cannot be frozen;

2.During installation, avoid scratching the O-ring seal;

3.Do not use media beyond the prescribed limits;

4.The power supply needs to be filtered to prevent damage to this product caused

5. Please do not exceed the specified range of power supply voltage;

6. It is strictly prohibited for cables to bear tension;

7. Avoid falling, hitting, and puncturing hard objects;

8. Avoid product exposure to water and strictly prohibit water immersion;

9.It is strictly prohibited to disassemble the casing to avoid product damage.
Disclaimer