40W din rail switch power supply 40v 12vac 24vdc MDR-40-12 Industrial Ac to Dc Single Output Power Supply

1. AC input range selectable by switch

2. Protections: Short circuit / Overload / Over voltage / Over temperature

3. 100% full load burn-in test

4. Low cost, high reliability

Ripple & Noise 80mVp-p 120mVp-p 150mVp-p 200mVp-p
Voltage Tolerance ±2.0% ±1.0% ±1.0% ±1.0%
Line Regulation ±1.0% ±1.0% ±1.0% ±1.0%
Load Regulation ±1.0% ±1.0% ±1.0% ±1.0%
Setup, Rise Time 500ms,30ms/230VAC 500ms,30ms/115VAC at full load
Hold up Time 50ms/230VAC 20ms/115VAC at full load
Voltage Range 85~264VAC 120~370VDC
Frequency Range 47~63Hz
Efficiency 78% 86% 88% 88%
AC Current 1.1A/115VAC 0.7A/230VAC
Inrush Current Cold start 30A/115VAC 60A/230VAC
Over Load 105% ~ 150% rated output power
Protection type : Constant current limiting , recovers automatically after fault condition is removed
Working Temp -20 ~ +70ºC (Refer to "Derating Curve")
Working Humidity 20 ~ 95% RH non-condensing
Storange Temp.,Humidity -40 ~ +85ºC, 10 ~ 95% RH
Temp Coefficient ±0.03%/ºC (0 ~ 50ºC)
Withstand Voltage I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
lsolation Resistance I/P-O/P, I/P-FG, O/P-FG :100M Ohms / 500VDC/25ºC/70% RH
Dimension 40*90*100mm
Weight 0.3Kg