GMP standard machine. It
is main applied for drying powder or granules
in pharmaceutical, foodstuff, and chemical industries.
Fluid bed to achieve fast heat transmission of medium.Seal negative pressure operation, there is no dust.Because of using anti-static material as filter, it is safe in operation;
The equipment has no dead corner so it is easy to clean fully and there is no cross pollution;
It is in conformity with the requirements of GMP.
Application
It is widely applied for the granules made from the screw extruding machine, swing granulating machine, and rapid mixing granulating machine etc.For the drying of powder material or wet granules in pharmaceutical, food, feed, and chemical industries.
3. Large particle, small block, sticky block granular material.
4. Konjac, polyacrylamide and other material which volume changes during drying.
3. Large particle, small block, sticky block granular material.4. Konjac, polyacrylamide and other material which volume changes during drying.
Our Advantages
Features
1. The fluidized bed has a circular structure to avoid dead corners.
2. The hopper is set with stirring function to avoid the formation of gully flow when the wet material is agglomerated and dried.
3. The use of tipping unloading, convenient, rapid, and thorough, can also be designed according to the requirements of automatic material in and out system.
4. Closed negative pressure operation, airflow through filtration. Easy to operate, easy to clean, is in line with the GMP requirements of the ideal equipment.
5. The drying speed is fast, and the temperature is uniform. The drying time of each batch is 20-30 minutes.
Working principle
After the air is heated and purified, it is imported from the lower part by the induced draft fan and passes through the hole plate of the hopper. In the working room, after stirring and negative pressure action to form fluidization, water quickly evaporates with the exhaust away, the material is quickly dried.
Features1. The fluidized bed has a circular structure to avoid dead corners.2. The hopper is set with stirring function to avoid the formation of gully flow when the wet material is agglomerated and dried.3. The use of tipping unloading, convenient, rapid, and thorough, can also be designed according to the requirements of automatic material in and out system.4. Closed negative pressure operation, airflow through filtration. Easy to operate, easy to clean, is in line with the GMP requirements of the ideal equipment.5. The drying speed is fast, and the temperature is uniform. The drying time of each batch is 20-30 minutes.Working principleAfter the air is heated and purified, it is imported from the lower part by the induced draft fan and passes through the hole plate of the hopper. In the working room, after stirring and negative pressure action to form fluidization, water quickly evaporates with the exhaust away, the material is quickly dried.
Product Parameters