SLD Make Up/Break Out Unit

Features and Benefits
•
Hydraulically controlled clamp increases reliability, the main/back clamp are all oil cylinder clamping, stable and reliable
Fully rotational with a traversing tail stock, the main clamp can rotate any circle continuously 360 degrees, and the back clamp can be equipped with left-moving and right-moving device
The hydraulic control device provides power for the bucking machine, the motor drives the plunger pump, the high pressure oil passes through the multi-way valve, which
respectively
controls the positive and reverse rotation of the main clamp, the tightening and loosening of the main clamp, the tightening and loosening of the back clamp, the moving left and right of the back clamp. And the control panel has 3 pressure adjusting handwheels to facilitate the adjustment of pressure.
Equipped with automatic torque control and display system, after setting the torque value, through the sensor under the back clamp to measure the signal, after computer processing, automatically generate the turns count - torque, time - torque, speed - time curves, when the buckle reaches the set torque value, the relief valve is automatically unloaded, the equipment stops rotating, the torque can be measured, the English and Chinese interface can be freely switched. KN.m and lb-ft free to switch
Accurate graph reports on threaded makeups for full authentication and traceability
Automatic deceleration when operating torque approaches set torque

The Machine Consists of