Product introduction:

Product introduction:

The ribbon mixer is composed of a U-shaped container, ribbon mixing blades and transmission parts; the U-shaped long cylinder structure enables the mixed material (powder, semi-fluid) to move with small resistance in the cylinder. The positive and negative rotating spirals are installed on the same horizontal axis to form a low-power and high-efficiency mixing environment. The spiral ribbon blades are generally made of double or triple layers. The outer spiral gathers materials from both sides to the center, and the inner spiral Conveying the material from the center to both sides can make the material form more eddy currents in the flow. Speed up the mixing speed and improve the mixing uniformity.

The ribbon mixer is composed of a U-shaped container, ribbon mixing blades and transmission parts; the U-shaped long cylinder structure enables the mixed material (powder, semi-fluid) to move with small resistance in the cylinder. The positive and negative rotating spirals are installed on the same horizontal axis to form a low-power and high-efficiency mixing environment. The spiral ribbon blades are generally made of double or triple layers. The outer spiral gathers materials from both sides to the center, and the inner spiral Conveying the material from the center to both sides can make the material form more eddy currents in the flow. Speed up the mixing speed and improve the mixing uniformity.

1.material selection

1.material selection

Material can be carbon steel, manganese steel, ss304, 316L and 321; besides, different material can also be used in combination.Material is different between the part contact with the raw material and the parts don’t contact with the raw material.Surface treatment for stainless steel include sandblasting, wiredrawing, polishing, mirror polishing, all can be used in different parts of a mixer.

Material can be carbon steel, manganese steel, ss304, 316L and 321; besides, different material can also be used in combination.Material is different between the part contact with the raw material and the parts don’t contact with the raw material.Surface treatment for stainless steel include sandblasting, wiredrawing, polishing, mirror polishing, all can be used in different parts of a mixer.

2.driven unit

2.driven unit

The driven unit, power and output speed are varied according to different raw material, starting method, and processing.Options for motor: general motors, explosion-proof motors, variable frequency motor, high efficiency and energy saving motor.Commonly used reducers: R-series, K-series, and F-series gear box; cycloidal reducer, universal gear reducer, planetary gear reducer. Commonly motor-gearbox connection: direct connection, pulley connection, hydraulic coupler connection.

The driven unit, power and output speed are varied according to different raw material, starting method, and processing.Options for motor: general motors, explosion-proof motors, variable frequency motor, high efficiency and energy saving motor.Commonly used reducers: R-series, K-series, and F-series gear box; cycloidal reducer, universal gear reducer, planetary gear reducer. Commonly motor-gearbox connection: direct connection, pulley connection, hydraulic coupler connection.

3.mixing unit

3.mixing unit

Different main shaft agitators can be equipped according to the properties of raw materials.Materials commonly mixed are: different kinds of powder to be mixed with each other, batches mixing for the same material, powder with a small quantity of liquid, liquid with some powder, like slurry, thickening or diluting slurry, granule with powder, granule with granule, or agglomerated material breaking and mixing, and cooling or heating.The main shaft agitator could be: inner and outer ribbon, paddle and ribbon, disconnected ribbon, and shaver-shaped agitator.

Different main shaft agitators can be equipped according to the properties of raw materials.Materials commonly mixed are: different kinds of powder to be mixed with each other, batches mixing for the same material, powder with a small quantity of liquid, liquid with some powder, like slurry, thickening or diluting slurry, granule with powder, granule with granule, or agglomerated material breaking and mixing, and cooling or heating.The main shaft agitator could be: inner and outer ribbon, paddle and ribbon, disconnected ribbon, and shaver-shaped agitator.

4.discharging unit

4.discharging unit

Standard valve for horizontal mixer is pneumatic planar flap valve. When close the valve, the planar flap match the mixing barrel perfectly, this makes no mixing dead zone and better mixing effect.The drive types of valve are Manual, pneumatic, and electric.Valves for consideration: powder spherical valve, cylinder valve, plum-blossom dislocation valve, butterfly valve, rotary valve etc.

Standard valve for horizontal mixer is pneumatic planar flap valve. When close the valve, the planar flap match the mixing barrel perfectly, this makes no mixing dead zone and better mixing effect.The drive types of valve are Manual, pneumatic, and electric.Valves for consideration: powder spherical valve, cylinder valve, plum-blossom dislocation valve, butterfly valve, rotary valve etc.

5.inlets

5.inlets

Various inlets on the top cover of the barrel can be designed according to different situations.They can be used as man hole, cleaning door, feeding hole, vent, and dust colleting hole. The top cover can be designed as fully-opened lid for easy cleaning.

Various inlets on the top cover of the barrel can be designed according to different situations.They can be used as man hole, cleaning door, feeding hole, vent, and dust colleting hole. The top cover can be designed as fully-opened lid for easy cleaning.

6.auxiliary components

6.auxiliary components

Mixer is frequently equipped with many auxiliary components, like steam coil jacket, honeycomb pressure jacket, medium circulation jacket, sampling valve, high speed chopper, temperature sensor, weighing system, dust removal system and so on.Different heat medium requires different jacket, it can be used for heating and cooling, while, the temperature should be within 250 Celsius degree.If a small quantity of liquid is required during mixing, spraying or atomizing unit is necessary in order to mix the liquid evenly with the main ingredient. The liquid-adding system is basically composed by the three parts: pressure source, liquid storage pot and spraying nozzles.

Mixer is frequently equipped with many auxiliary components, like steam coil jacket, honeycomb pressure jacket, medium circulation jacket, sampling valve, high speed chopper, temperature sensor, weighing system, dust removal system and so on.Different heat medium requires different jacket, it can be used for heating and cooling, while, the temperature should be within 250 Celsius degree.If a small quantity of liquid is required during mixing, spraying or atomizing unit is necessary in order to mix the liquid evenly with the main ingredient. The liquid-adding system is basically composed by the three parts: pressure source, liquid storage pot and spraying nozzles.

Working principle:

Working principle:

Horizontal ribbon mixer is mainly combined with mixing barrel, agitator, driven unit.Untwist double ribbon are swirled with the main shaft in the U shape barrel. The outer ribbon push the material from the two ends to the centre, inner ribbon push the material from center to the two ends.Thus to achieve material convention.The discharging port is set in the bottom centre, with the help of the outer ribbon,the material can be discharged completely, and no dead zone.

Horizontal ribbon mixer is mainly combined with mixing barrel, agitator, driven unit.Untwist double ribbon are swirled with the main shaft in the U shape barrel. The outer ribbon push the material from the two ends to the centre, inner ribbon push the material from center to the two ends.Thus to achieve material convention.The discharging port is set in the bottom centre, with the help of the outer ribbon,the material can be discharged completely, and no dead zone.

Selection way:

Selection way:

1. Choose the batch working capacity from 0.1cbm to 20cbm, select mixer accordingly.2. Choose material for the part contact with raw material, non-contact with raw material, other parts like motor and reducer,bearing material can not be chosen; According to the material to be mixed, processing condition, health level, raw material can be mild steel, sus304, sus316L, sus321; And choose the surface treatment according to the raw material.3. Motor power is chosen according to the material gravity, fluidity, and operation.Operation is divided as: Start mixer when it is empty (normal duty); Start mixer with load (heavy duty)4. Adding the auxiliary components like spraying, heating and cooling according to processing condition.5. Mixer inlets: feeding ports, cleaning port, vent.6. Chose discharging and driven mode: manual, pneumatic and electric.Note: mixer selection is a very important step, your detailed material information, processing and factory arrangement are very helpful to get professional technical support from us.

1. Choose the batch working capacity from 0.1cbm to 20cbm, select mixer accordingly.2. Choose material for the part contact with raw material, non-contact with raw material, other parts like motor and reducer,bearing material can not be chosen; According to the material to be mixed, processing condition, health level, raw material can be mild steel, sus304, sus316L, sus321; And choose the surface treatment according to the raw material.3. Motor power is chosen according to the material gravity, fluidity, and operation.Operation is divided as: Start mixer when it is empty (normal duty); Start mixer with load (heavy duty)4. Adding the auxiliary components like spraying, heating and cooling according to processing condition.5. Mixer inlets: feeding ports, cleaning port, vent.6. Chose discharging and driven mode: manual, pneumatic and electric.Note: mixer selection is a very important step, your detailed material information, processing and factory arrangement are very helpful to get professional technical support from us.

Configuration 1: using crane to hang jumbo bag material and feeding the mixer Configuration 2: mufti-level platform, manual undo the bag, mixing and packing with a jumbo bag packer.Configuration 3: simple mixer frame, feed the mixer manually with the help of a folk lift.Configuration 4: using manual feeding platform, after mixing, screw conveyor send the material to the storage tank, a packer under it.Configuration 5: load the material on the ground by manual, use vacuum feeder to transfer material to the mixer after mixing, pack with a bulk-bag packer.Configuration 6: multi-stage vacuum feeder, store it after mixing, then packing.Configuration 7: multi-level operation platform, elevator sending to material silo, mixing, storage, and then packing. Towerstructure.Configuration 8: bulket elevator feeding, mixing, storage, and packing.Configuration 9: vacuum feeding, mixing, storage, packing.Configuration 10: Manual feeding, mixing, storage, packing.Common supporting equipments.

Configuration 1: using crane to hang jumbo bag material and feeding the mixer Configuration 2: mufti-level platform, manual undo the bag, mixing and packing with a jumbo bag packer.Configuration 3: simple mixer frame, feed the mixer manually with the help of a folk lift.Configuration 4: using manual feeding platform, after mixing, screw conveyor send the material to the storage tank, a packer under it.Configuration 5: load the material on the ground by manual, use vacuum feeder to transfer material to the mixer after mixing, pack with a bulk-bag packer.Configuration 6: multi-stage vacuum feeder, store it after mixing, then packing.Configuration 7: multi-level operation platform, elevator sending to material silo, mixing, storage, and then packing. Towerstructure.Configuration 8: bulket elevator feeding, mixing, storage, and packing.Configuration 9: vacuum feeding, mixing, storage, packing.Configuration 10: Manual feeding, mixing, storage, packing.Common supporting equipments.