MF840 POLYSULFIDE SEALANT
Two
Component
Polysulfide
Sealant
for
Insulating
Glass
Secondary
Sealant
for
The
Manufacturer of
Insulating
Glass
APPLICATION FIELD:
Secondary
sealant
for
the
manufacturer
of
insulating
glass.Two
component
,
room
temperature
cured
polysulfide
sealant.Excellent
adhesion
to
most
building
materials
such
as
glass,
aluminum
alloy,
and
galvanized-
steel,stainless
steeletc.Solvent
free,
primers
are
not
required
.High
strength
and
elasticity.APPLICABLE
STANDARDS:
EU
Specification:
EN1279
-
part
2,3,
4
China
Specification
:
GB/T
29755
IGCC-IGMA Approved
.♦ TECHNICAL DATA - TYPICAL PROPERTIES
MOISTURE VAPOUR TRANSMISSION (MVTR) 11 gr/m2.24hrs.2mm EN 1279/4
TENSILE ADHESION STRENGTH approx. 0.70 [MPa]
Test Condition: As cured after 14 days at Temperature 23°C and 50% R.H.♦ PACKAGINGCom A190 L/drum Com A 30 kg/pail Com A4 kg/pailCom B 19 L/pail Com B 3.6 kg/pail Com B 0.48 kg/bag
.APPLICATION FIELD
One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.It can keep its plastic and sealing properties in a wide temperature range.Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.Minimum moisture vapour and gas permeation.Excellent temperature stability: - 30°C to 80°C.♦ TECHNICAL DATA - TYPICAL PROPERTIES
♦ APPLICATION INSTRUCTIONS
Hot Applied Butyl Sealant for Insulating GlassPrimary Sealant for the Manufacturing of Insulating Glass.APPLICATION FIELD
One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.It can keep its plastic and sealing properties in a wide temperature range.Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.Minimum moisture vapour and gas permeation.Excellent temperature stability: - 30°C to 80°C.♦ TECHNICAL DATA - TYPICAL PROPERTIES
MF322 two-component polyurethane corner glue
Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.How to use instructions
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).Package and Delivery
Packaging
1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
Transport transmission
This product is non-hazardous and can be transported by train, car, ship and plane
Store
Can be stored for 6 months in a cool, ventilated and dry place.Precautions and precautionsThe initial 20g of mixed glue may be insufficiently mixed and is not recommended.The glue mixed at room temperature should be used during the application period.Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;avoid contact with children; do not contaminate food, medicine or cosmetics.The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.