How it works: The slurry or other liquid to be treated enters the settling zone from the feeding zone, where a relatively dynamic and balanced suspension process is formed. The particles with larger particle size in the slurry pass through the suspension filtration in the concentration zone and quickly precipitate into the bottom discharge port under the power of the water flow due to their larger settling speed. The sediment particles, which failed to overcome the power of the current pulse, were followed by higher particles to rise and flow into the inclined tube area, which was filled with a square corner thin wall honeycomb tube at a certain Angle. The fine particles that divide the water flow into many precipitating units and enter the inclined pipe area reach the inclined pipe wall under the condition of laminar flow hydraulic settlement, accumulate to a certain amount, and then slide to the sinking and rising zone under the action of gravity. According to the design requirements of the separation particle size treatment capacity, the fine particles that fail to settle in the inclined pipe area will be discharged with the flow, so as to realize the process of classification and precipitation

Model
Dimension(mm)
Density
%
Swage treatment
Capacity
(m3/D)
TY-1M²
1700*1245*2610
35-60
100-150 m3 /D
10-7
TY-5M²
3580*2350*3500
35-60
10-1000 m3 /D
300-500
TY-10M²
7160*2350*3500
35-60
20-2000 m3 /D
500-1500