● Specialized for cutting, double-sided milling and double-sided laser marking of aluminum profiles.● High efficiency: 45° saw blade servo feed, high efficiency.● Large range: 300-7000mm, profile width 150mm, height 150mm.● High power: equipped with 3KW direct-connected motor, the efficiency of cutting profiles with insulation materials is 30% higher than that of 2.2KW● High precision: integral casting cutting mechanism, 3 fixed angles: 2 45° + 1 90°, cutting length error 0.1mm, cutting surface flatness ≤0.10mm, cutting angle error 5′.● High laser processing efficiency: The rear side is equipped with a laser cutting device, the power can be automatically adjusted according to the wall thickness of the profile, and the cutting quality is good. Automatically switch the marking or cutting state according to the process requirements to carry out marking or cutting.● The front side is equipped with a special laser marking machine, which can carry out laser marking on both sides at the same time, with high efficiency.● Powerful functions: the front milling cutter can drill and mill horizontally, and the front milling cutter can also rotate the angle to drill and mill, which is suitable for special hole and groove processing such as internal sinks.● Fool-style operation: no skilled workers are required, no need to adjust the manipulator (it can automatically rotate and clamp special-shaped materials), no need to consider the cross-section of the profile (Z-shaped fan and conversion frame are also no problem, as shown below:), no need to customize the mold, and no need to consider the height of the profile.● High degree of automation: one general worker can operate it, put 7 profiles at a time, and automatically complete feeding, cutting, and unloading.● Intelligent: The feeding system is fully servo-controlled, intelligently identifies profile data (height, wall thickness), and intelligently adjusts processing parameters (feed speed, feed position)● 0 mistakes: The equipment comes with an anti-error mechanism.● Data import method:1. Software docking: online with ERP software, such as: Klaes, Jopps, Mendaoyun, Zaoyi, Xinger, etc.;2. Network/USB import: according to the factory's existing material list format;3. Manual input.● Equipped with automatic chip conveyor (material head) and automatic dust collection device (aluminum chips), which reduces the frequency of cleaning and improves work efficiency.● Double-layer protection of the cutting chamber, low noise, safety and environmental protection.● Safety: gas and electric protection device, mechanical protection device to ensure safe production.● Standard tool life management system, automatic reminder when saw blade needs to be sharpened and replaced.● Standard automatic maintenance reminder function, eliminate equipment hidden dangers in advance and improve equipment utilization rate.● Standard production capacity statistics, equipment status time statistics, real-time monitoring, controllable delivery date, reduce inventory, and improve capital flow utilization.● With remote service function (maintenance, repair, training), save service time, reduce downtime, and reduce the factory's dependence on skilled workers.

Configuration of main components