GD14 Dash Cam Detailed Specifications
Video Audio
Built in speaker Supported, mono
Built in MIC Supported, mono
Front Camera
Sensor Type 1/2.9 '', 2 megapixel CMOS sensor
FOV D:125° H:105° V:58°
Resolving Power 1920*1080
Frame Rate 1080p@30fps
Inside Camera
Sensor Type 1/3 ", 2 megapixel CMOS sensor
FOV D:120°H:100° V:45°
Resolving Power 1920*1080
Frame rate 1080p@30fps
Operation Environment
Storage Temperature -30ºC~+80ºC
Atmospheric Pressure 860Mbar~1060Mbar
Packing Content
GD14 equipment × 1. Emergency button × 1. External GPS antenna × 1. SIM card retrieval pin × 1. Power cord × 1

1.How to record an emergency video?

Emergency video recording is enabled by default. If the dash cam detects any collisions, it will automatically record an emergency video.
Also the recording process cannot be interrupted. Once the emergency recording is completed, the dash cam will automatically switch back to normal video recording mode.

2.Why the dash cam stops recording?

If the dash cam automatically stops recording, please use the following to solve the problem,
1) Restoring dashcam to factory settings
2) Formatting the internal memory card
3) Updating firmware
4) Detecting abnormality in the internal memory card (e.g., non-dash cam-related files). In this case, please format the internal memory card.

After exiting these operations, the dash cam will automatically resume recording.

3.No driving route data displays on the app/platform

1) The positioning system on the dashcam is not functioning and cannot obtain positioning information.
Solution: Check the dashcam's GPS light. If it is not lit, move the dash cam to an open space and wait for approximately 3 minutes before trying again.

2) The car did not move, hence no driving record data was generated.
Solution: Ensure that the dashcam is correctly installed in the car and operating normally. Drive the car a certain distance to generate driving record data.

3) The phone has no network connection. The phone requires a network connection to load the map when viewing driving records.
Solution: Disconnect the phone from the dashcam's Wi-Fi hotspot and connect it to a network (WLAN or mobile data network).

4.Why does ADAS calibration fail?

1) The dashcam's camera is not positioned correctly, too far from the center front, i.e. too close to the left and right sides or the upper and lower sides.
2) The nighttime light is too dim, making it difficult to identify the lane line accurately.
3) The lane line appears blurred, making it impossible to identify.