The dipstick is a long and flat metal rod or a strip with a plastic ring handle,The rod was reching to the engine oil pan. Its primary purpose is to indicate the oil level inside the engine, but it does more than that. The dipstick can tell you about the condition of the oil. Also, it can give you an idea of the internal health of the engine.

Fluid Level Indicator (FLI) product line is ideally suited for a wide range of engine, transmission and other applications

Function oil level measure gauge can be divided into Engine oil dipstick transmission oil diptisck
Material oil gauge dispstick can be made by plastic abs steel metal plate or strip CNC metal part

The oil level on a dipstick reflects the amount of oil in the oil pan, which is the reservoir that holds the oil when the engine is not running. When the engine is running, some of the oil is circulated through the engine to lubricate, cool, and clean the moving parts. This means that the oil level in the oil pan will drop slightly when the engine is on, and rise back up when the engine is off.

An automotive molder was molding and assembling an Oil Level Dipstick consisting of a blade and finger ring.

Engine oil dipstick tube production workshop
Brazing welding workhop: To give out better performance of the bypass tube ,EGR tube ,cylinder inlet pipe we use the brazing copper welding pipe instead of shield welding.

Bending workshop:To give out the best bending service for the bending pipe ,The bending pipe production was completed by the CNC bending machine or stamping machine ,to make each conner perfect withou winkle.

We use the CNC bending machine to bending the tube for Engine Water Pump inlet Pipe, water pump to cylinder pipe ,Engine Coolant Bypass Pipe,thermostat to engine cyliner,Engine cylinder inlet pipe,Engine heater water pipe ,EGR pipe tube ,Engine pump pipe,Car air conditioning tube

Metal stamping is essential for forming materials like steel, copper, and brass into components like terminals, connectors, wire forms, and brackets in the automotive sector. It ensures that car parts are robust while providing speed, accuracy, and cost-effectiveness. It does, however, have restrictions, such as limits on material thickness. Metal stamping is essential to the production of automobiles since stamped parts are essential for a vehicle's strength and safety.
Dipstick tube bracket,cylinder water inlet pipe bracket

Leaking test workshop:Use air pressure to keep it within 30 second to inspection the cylinder water inlet pipe sealing

Seamless steel tube pipe raw material inspection

We focus on the stamping forming bending welding part for almost 30 years.Founded in 1992, Started exporting in 2008, which is now covered more than 10000 square meters and with 439 employee.We were the first tire of the OEM supplier for VW TOYOTA HONDA FORD in China,Customer first:We control the quality by APQP,PPAP
Our business focus on the Engine Water Pump inlet Pipe , Coolant Bypass Pipe,cylinder pipe,heater water pipe,EGR pipe tube,Engine coolant pipe,

We were supply the Engine water pump pipe for a lot of application such as auto engine cooling system and the others ,We also support the after market service.MOQ is also ok for us The engine cooling system container a lot of pipe :

1.Engine Water Pump inlet Pipe,for water pump to cylinder 2.Engine Coolant Bypass Pipe,thermostat to engine cyliner
3.Engine cylinder inlet pipe,Engine heater water pipe 4.EGR pipe tube ,Engine pump pipe,Car air conditioning tube

1.Engine Water Pump inlet Pipe,for water pump to cylinder
2.Engine Coolant Bypass Pipe,thermostat to engine cyliner
3.Engine cylinder inlet pipe,Engine heater water pipe
4.EGR pipe tube ,Engine pump pipe,Car air conditioning tube
5.Engine oil dipstick and dipstick guide tube