Main Features
Adopted high heat conduction fin heat dissipation technology, advanced convection
hole design which can rapidly dissipate heat when installed in the lamp.
Excellent operating temperature -40°C~50°C
The ultra-thin fin heat dissipation structure reduces the weight of the module,
effectively reduce the weight of lamps while satisfying the heat dissipation.
Variety beam angles,150x70°,140x100°,24°,36°,60°,90°
High safety,low voltage input voltage is safe for people, which effectively
prevents electric shock and electric leakage.
Easy to assemble and maintain with national standard M15 electrical interface,
achieved plugged and play,only need loosening the screw during maintenance.
Green product,no UV,IR radiation or mercury pollution.Passed IEC62471.
With excellent housing design reach IP66rating.
Life-span over 50,000 hours,5 years warranty.

★important hints*
1. Please do not receive solar panels above 6V, so as not to damage solar lights.
2. Please do not connect 220V AC to avoid damaging solar lights!
3. Please pay attention to fixing the solar panels and lamps so as not to hurt people
when the wind blows.
4. Please do not disassemble the solar energy lamp, so as not to affect maintenance.
5.In order not to affect the use of lights, clean up the dust and dirt on the surface of
the solar panels every 3 months.
6.Please check regularly whether the thread has come off or broken.
7.Solar powered lamps contain batteries. Batteries are recyclables. Please do not litter.
8.The battery must be full of electricity before it can be used for more than 12 hours.
★ Warm hints ★
1.Solar energy lamp absorbs sunlight and converts it into electric energy by solar
panels, and stores the electric energy into the battery for solar energy work.
2.Our country starts late in the solar energy industry, and we don't know much about
solar energy. As long as there is light in the daytime,it can be filled with electricity
and it should be light at night. This is wrong.
International Standard Test conditions for solar panels:
AMI .5, 1000W/m2x 25°C
AM 1.5 It is the actual distance of light passing through the atmosphere to 1.5 times
the vertical distance of the atmosphere.
25°C It means charging at 25°C.
1000W/m2 It's the intensity of the sun's radiation,
the maximum charging current can be achieved by solar panels, Otherwise, the maximum charging current can not be reached.In autumn, winter and cloudy days,the illumination is weak in rainy days, and the charging effect will obviously weaken, therefore, lighting time will be shortened, and solar water heater is a reason.
Proposal:In continuous rainy days, the switch can be switched on by remote control, saving electricity and prolonging battery life.